{Fixed} John Deere Js63 Transmission Problems!

Last Updated on September 25, 2023 by Robert Wilson

If you’re a John Deere fan, you know that their JS63 mower is one of the best on the market.

But what you may not know is that there have been some reports of transmission problems with this model.

The first problem is that the transmission may not engage properly when the PTO is turned on. This can be caused by a variety of things, but the most likely culprit is a faulty PTO clutch.

Another problem that has been reported is that the transmission slip out of gear while the mower is in use.

This can be caused by worn out gears or bearings in the transmission.

Moreover, some users have reported that the mower seems to “jump” when they are trying to engage the blades, while others have said that it is difficult to get the mower into reverse.

Although John Deere has not issued a recall for this problem, they have released a service bulletin which provides instructions for dealers on how to fix the issue.

If you’re experiencing these transmission problems, take your mower to your nearest John Deere dealer and they should be able to take care of it for you.

Most Common John Deere Js63 Transmission Issues

The John Deere JS63 is a self-propelled lawn mower that was first introduced in 2002. It is powered by a Kawasaki FS541V engine and has a 63″ cutting deck.

The JS63 has hydrostatic transmission, which means that there are no gears to shift – you simply push a lever forward to go and pull it back to stop.

This can be advantageous because it eliminates the need to stop and change gears, but it also means that there can be problems with the transmission if something goes wrong.

One of the most common issues with the JS63 transmission is when the mower starts to creep or crawl forward even when the lever is in the neutral position.

This can be caused by several things, such as low hydraulic fluid levels, an air leak in the system, or a problem with one of the hydrostatic pumps.

If your JS63 starts creeping forward, you should check the fluid levels and look for any leaks before taking it to a John Deere dealer or service center for repairs.

Another common issue is when the JS63 won’t move at all, even when the lever is in the forward position.

This can be caused by a number of things as well, such as low hydraulic fluid levels, an air leak in the system, or a problem with one of the hydrostatic pumps.

Again, checking for leaks and topping off fluids may fix this problem temporarily, but you will likely need to take your mower to a John Deere dealer or service center for repairs eventually.

If your John Deere JS63 suddenly stops moving while you are mowing (even if the lever is still in the forward position), this could indicate a serious problem with one of the hydrostatic pumps.

You should immediately shut off the engine and call a John Deere dealer or service center for assistance.

Do not attempt to use your mower again until it has been repaired by a qualified technician – continuing to use it could cause further damage and void your warranty.

How Can I Prevent Transmission Problems on My John Deere Js63 Mower?

If you’re having transmission problems with your John Deere JS63 mower, there are a few things you can do to try and prevent further issues.

First, make sure the transmission is properly lubricated. Check the owner’s manual to see what kind of oil should be used and how often it needs to be changed.

If the problem persists, take the mower to a qualified repair shop for further diagnosis and repairs.

What Should I Do If I Start to Experience Transmission Problems With My John Deere Js63 Mower?

If you start to experience transmission problems with your John Deere JS63 mower, the first thing you should do is check the oil level.

If the oil level is low, add oil as needed and check the transmission for leaks. If there are no leaks, the next step is to check the transmission belt for wear or damage.

If the belt looks worn or damaged, replace it with a new one.

Finally, if none of these steps fix the problem, you may need to take your mower to a John Deere dealer or qualified repair shop for further diagnosis and repair.

John Deere Js63 Troubleshooting

The John Deere Js63 is a self-propelled lawn mower that is known for its durability and performance. However, like all machinery, it can occasionally have problems.

In this secttion, we’ll go over some common issues with the Js63 and how to troubleshoot them.

One of the most common issues with the Js63 is that it will not start. This can be due to a variety of reasons, such as a dead battery, bad spark plugs, or fuel issues.

If your Js63 won’t start, first check the battery to make sure it has enough power.

Next, check the spark plugs and replace them if necessary. Finally, make sure there is fresh fuel in the tank and that the carburetor is clean.

Another common issue with the Js63 is that it stalls while in use.

This can be caused by a clogged air filter or an issue with the carburetor. If your Js63 stalls while in use, first check the air filter and clean or replace it if necessary.

Then check the carburetor and adjust it according to the manufacturer’s instructions.

If you’re having any other problems with your John Deere Js63 self-propelled lawn mower, consult your owner’s manual or contact a qualified repair person for assistance.

Conclusion

John Deere JS63 Transmission Problems The John Deere JS63 is a lawnmower that has been known to have transmission problems. These problems can be caused by several factors, including incorrect lubrication, overloading the mower, or using the wrong type of oil.