[Top 5] 2000 Ford Ranger Transmission Problems & Fixes

Last Updated on November 8, 2023 by Robert Wilson

The 2000 Ford Ranger has a well-known transmission issue where the gears slip and grind.

In some cases, the Transmission will completely fail and need to be replaced.

This can be extremely frustrating for drivers, especially when it happens at inopportune times.

There are a few things that can cause this problem, and unfortunately, it is often an expensive fix.

The good news is that there are some aftermarket companies that make replacement parts that can help to solve this problem.

2000 Ford Ranger Transmission Fixes

Ford Ranger Common Issues

The Ford Ranger is a compact pickup truck that was introduced in 1983.

It has been one of the most popular trucks on the market, but like any vehicle, it is not without its problems.

One of the most common issues with the Ranger is transmission failure.

Transmission failure can be caused by a number of things, but the most common cause is lack of maintenance.

The fluid in your transmission needs to be changed regularly in order to keep it running smoothly.

If the fluid isn’t changed, it can break down and cause damage to the transmission.

Another common cause of transmission failure is overheating. The transmission relies on coolant to keep it from overheating, so it can cause damage to the transmission.

If you’re having problems with your Ford Ranger’s transmission, it’s high time to take it to a mechanic as soon as possible.

2000 Ford Ranger Transmission Rebuild Cost?

Assuming you would like an answer for the United States, it would cost anywhere from $1,400 to $4,000+ to rebuild a transmission on a 2000 Ford Ranger.

This estimate does not include the cost of labor and is only for parts.

The cost varies depending on which part of the country you are in, what kind of transmission fluid your vehicle requires, and whether or not you need special tools to complete the job.

Common Signs of a Transmission Failure

If your car is having trouble shifting gears, it may be experiencing a transmission problem.

Other signs of a potential transmission issue include the following:

-Grinding or shaking when shifting gears

– Difficulty shifting into certain gears

– Transmission fluid leaks

– Check Engine Light is on

2000 Ford Ranger Shift Solenoid Problem

If you’re having problems with your 2000 Ford Ranger’s shift solenoid, you’re not alone.

Many 2000 Ranger owners have reported this issue, and it can be a real pain. Luckily, there are some things you can do to fix the problem.

First of all, check the fluid level in your transmission. If it’s low, top it off and see if that fixes the problem. If not, then you’ll need to check the shift solenoids themselves.

There are two shift solenoids on the Ranger – one for 1st and 2nd gear, and one for 3rd and 4th gear.

To check them, remove the battery cover and disconnect the electrical connector from each solenoid.

Then use a multimeter to test for continuity between the terminals on each solenoid.

If there is no continuity, then the solenoid is bad and will need to be replaced.

Once you’ve replaced the bad shift solenoid, reattach the electrical connectors and replace the battery cover. Start up your Ranger and see if it shifts properly now.

Conclusion

The 2000 Ford Ranger has been known to have transmission problems. This is often due to a faulty shift solenoid or torque converter.

These issues can be expensive to fix, so many owners choose to simply sell their Rangers rather than pay for the repairs.